Select Measurement Unit; View Barometer History; Bar Chart Display; Set Altitude - Oregon Scientific BAR988HG Bedienungsanleitung

Barometric data is shown in 2 areas at the bottom of the
display. The upper area shows a 24-hour bar chart.
The lower area shows current and historical readings.

SELECT MEASUREMENT UNIT

Slide the mb / inHg switch (in the clock battery
compartment), to change the display unit.

VIEW BAROMETER HISTORY

Navigate to the Barometer Area. Then press HISTORY
repeatedly to scroll through the measurements. The
number shown in the HR box indicates how long ago
each measurement was taken (e.g. 2 hours ago, 3 hours
ago, etc.).
BAR988HG English R5 OP
All manuals and user guides at all-guides.com
17
Black

BAR CHART DISPLAY

The bar chart visually shows atmospheric changes from
the current hour (0) to 24 hours prior (-24).

SET ALTITUDE

Set the altitude to match how far above or below sea
level you are living. This ensures that the barometric
pressure readings are accurate.
1. Navigate to the Barometer Area.
2. Press and hold HISTORY for 2 seconds.
17
8/20/04, 11:25 AM