Herunterladen Inhalt Inhalt Diese Seite drucken

Operation - Kinzo X-Power Handbuch

Heizpistole 1600w
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8
• When you don't know which adjustment you have to use, please start with the low adjustment en slowly
raise the temperature until you have reached the wanted result.
7.1 Mounting the correct accessory
This tool is supplied with a set of accessories for different applications
Icon
Description
Glass protection nozzle
Spoon reflector nozzle
Cone nozzle
Fish tail surface nozzle
Scraper
• Make sure that the tool is switches off and the nozzle has cooled down.
• Set the desired accessory onto the nozzle.

8 OPERATION

Always observe the safety instructions and applicable regulations.
• Use only one hand to hold the tool Do not place your other hand over the air vents
Prior to operation:
• Mount the correct accessory for the application.
• Set the desired air temperature.
8.1 Switching on and off
• To switch the tool on, set the on/off switch to position I. Some smoke may be emitted after switching on;
this does not indicate a problem.
• To switch the tool off, set the on/off switch to position O. Let the tool cool down before moving or storing it.
8.2 Stripping paint
• Mount an appropriate accessory.
• Set a high air temperature.
• Switch the tool on.
• Direct the hot air onto the paint to be removed.
• When the paint softens, scrape the paint away using a hand scraper.
Do not strip metal window frames, as the heat may be conducted onto the glass and crack
it. When stripping other window frames, use the glass protection nozzle.
• Use the scraper when you are stripping the window frames..
• Do not keep the tool directed on one spot too long to prevent igniting the surface.
• Avoid collecting paint on the scraper accessory, as it may ignite. If necessary, carefully remove paint debris
from the scraper accessory using a knife.
8.3 Stationary use
This tool can also be used in stationary mode.
71805 Manual.indd 5
Propose
Protecting windows when stripping frames
Soldering pipes.
Welding, shrink sleeving (heat concentrated over small area)
Drying, thawing (heat spread over wider area)
Stripping paint and varnish
A
5
31-12-10 15:20

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis