Viesta DH600-A Gebrauchsanleitung Seite 9

Version: 1.0
KEN001DH 26.09.2017
Installation (Vent inside)
If you do not have an outlet to the outside, an exhaust pipe is not required and the installation is similar to
the one shown in section "Installation (vent outside)".
An activated carbon filter can be used to trap odours.
In order to install the activated carbon filter, the grease filter must be detached first.
Press the lock and pull it downward.
Place the activated carbon filter into the unit and turn it clockwise. Repeat the same on the other side.
CLOSE
NOTE
● Make sure the filter is securely locked. Otherwise, it can fall and cause danger.
● When the activated carbon filter is attached, the suction power will be lower.
[ EN ● 9 ]