Viesta DH600-A Gebrauchsanleitung Seite 6

3. Secure screws to make sure the hood is stable on the wall.
After placing the cooker hood on the bracket, open the filter, mark and drill 4 holes and fasten the hood
on the wall with 2 x wall plugs and 2 x ST4 x 30mm screws.
Wall plugs
4. Place the plastic duct on the cooker hood.
[ EN ● 6 ]
Version: 1.0
KEN001DH 26.09.2017
Screws
(ST4 x 30mm)