Viesta DH600-A Gebrauchsanleitung Seite 12

Fault
Light on, but fan does not work
Both light and fan do not work
Strong vibration of the unit
Suction performance not good
TROUBLESHOOTING
Cause
The fan blade is jammed.
The motor is damaged.
Light bulb burnt.
Power cord loose.
The fan blade is damaged.
The fan motor is not fixed
tightly.
The unit is not hung properly
onto the bracket.
Distance too large between the
unit and the cooking hob
[ EN ● 12 ]
KEN001DH 26.09.2017
Solution
Switch of the unit and repair
by qualified service personnel
only.
Replace the bulb with correct
rating.
Plug in to the power supply
again.
Switch of the unit and repair
by qualified service personnel
only.
Switch the unit off and repair
by qualified service personnel
only.
Take down the unit and check
if the bracket is in proper
location.
Readjust the distance to
65-75cm ( 25.6 - 29.5 inch )
Version: 1.0