Viesta DH600-A Gebrauchsanleitung Seite 8

5.3 Fix the upper chimney on the upper chimney bracket with 2 screws (4 x 8mm).
Then fix the upper chimney bracket on the wall.
Before fixing the bracket on the wall, you should decide on where the upper chimney bracket fixing
holes for installation should be.
6. Fasten the lower chimney to the cooker hood with 2 of the 4x8mm screws.
Screw
WARNING
For safety reasons, use only the same size of fixing or mounting screws that are recommended
in this instruction manual.
WARNING
Failure to install the screws or fixing devices in accordance with these instructions may result in
electrical hazards.
[ EN ● 8 ]
KEN001DH 26.09.2017
Screw
Version: 1.0