Information In Base Mode; The Clock Field - OWIM HG05124A Bedienungs- Und Sicherheitshinweise

Once the main station has received the signal from the outdoor sensor
and the DCF signal, it enters base mode.
In base mode the main station will display the following information:

Information in base mode

The clock field

Time:
the afternoon until 11:59 o'clock at night will show PM (Latin for "post
meridiem" = afternoon) in front of the time.
During Daylight Saving Time DST will appear at the top between the
hour and minute. This display is only functional when receiving the
DCF signal.
Date and day:
the abbreviation M (month) the date of the current month. On the right
the abbreviation for the current day of the week appears. The default
language for this abbreviation is German, but can be changed.
Please refer to section Basic settings.
The radio tower symbol:
The radio tower symbol indicates successful reception of the
DCF signal. The main station synchronises its internal clock
16 GB
24
The time will be displayed in 24 hour
format according to the default settings.
When selecting 12 hour mode in basic
settings, the time from 12:00 o'clock in
To the left of the abbre-
viation D (Day) the date
of the current day ap-
pears, and to the left of