Mounting; Installation; Cable Routing; Connecting Cables In The Motorcontroller - Window Master WCC 106 BT Installationsanleitung

LED signalling
Connection cable
Operation range between
MotorController and remote control
Operating conditions
Max actuator activation duration (duty
cycle)
Material
Colour
Size
Weight
Protection class
Safety class
Delivery
Note

Mounting

5
The MotorController may either be mounted horizontally or vertically on a
wall.
The MotorController is fixed to the wall through the back plate's Ø4.5 mm
mounting holes.
The MotorController should be mounted in a secure location so that it
is protected against the effects of fire and smoke.

Installation

6
6.1

Cable routing

The safety regulations in these guidelines must be closely followed. Regarding low power cable configuration we refer you to the
chapter "Cable dimensioning". The cable cross sections listed in the table of cable lengths must not be reduced.
The cables are led into the MotorController's cabinet via cut-outs in the bottom.
When routing cables, all applicable national regulations must be complied with.
The MotorController is supplied with a 1.2 m cable with Schuko plug.
6.2

Connecting cables in the MotorController

Cables are to be connected in accordance with the chapter "Connection plan for WCC 106 BT", the short chapters and other
relevant paragraphs in these guidelines.
Please ensure that connections are correctly executed - incorrect connection can lead to functional failure in the MotorController or
external products.
The installation must at all times adhere to the applicable regulations, standards and guidelines.
6.3

Connecting protective earth and 230V AC

WCC 106 BT is factory-fitted with a power supply cable with a 230V Schuko plug with earth wire.
3 green LEDs and 1 yellow indicate via blinking sequences failure and/or status of the
system and motor line. See paragraph on "Status and troubleshooting via LED on the
MotorController" for a detailed description and blinking sequences.
Actuators
Other components
The used Bluetooth technology (Bluetooth 4) has the following operation range:
- Outside: up to 50m in radius
- Inside: up to 10m in radius
Physical barriers such as walls, cabinets etc. will reduce the range.
-5°C - +45°C, for indoor mounting, the MotorController must not be covered
ED 40% (4 min. per 10 min.)
Plastic
White (RAL 9016)
MotorController: 215 x 206 x 37mm (W x H x D)
Remote control: 41 x 18 x 144mm (W x H x L)
MotorController: 0.92kg
Remote control: 61g
IP 20
I (with PE)
Standard version: MotorController with 1.2 m cable with Schuko plug and a
remote control
UK version: MotorController with 1.2 m cable with Schuko plug and UK
network adapter and a remote control
We reserve the right to make technical changes
6
flexible max. 6mm² / solid max. 10 mm²
min 0.2mm² / max. 1.5mm²