Read The Vehicle Information - NEXSMART V322 Benutzerhandbuch

button.
Press Up/Down button to select a module, and then press Return/Confirm button.
(2) Wait for several seconds, until the decoder PID mapping is verified.
(3) If the vehicle supports two types of test. Two types are displayed on the screen for selecting.
(4) If the vehicle supports "This Drive Cycle" ready test, the following information will be displayed on the
screen:
（5）Press Up/Down button to return to the previous menu.

3.7 Read the vehicle information

Vehicle information function can retrieve vehicle identification number (VIN), calibration sign, calibration
verification number (CVN) and the models above 2000 support the vehicle performance tracking of mode
9.
(1) In Diagnostic menu, press Up/Down button to select the vehicle information.
If the vehicle doesn't support this mode. "The selected mode is not supported !" information is displayed on
the screen.
(2) When decoder is reading the vehicle information, please wait for several seconds.
(3) In vehicle information menu, press Up/Down button to select the available items you want, and then
press Confirm button.
(4) Read the retrieved vehicle information on the screen.
8