Power Supply Of Vehicle; Product Setup; Language Setting - NEXSMART V322 Benutzerhandbuch

2.3 Power supply of vehicle

Vehicle data link connector (DLC) supplies the power to decoder. Open the decoder by the following steps:
(1) Take down DLC cover plate from the vehicle. (Note: Some vehicles have the plastic cover plate, need
to take down it before inserting OBD II cable.)
(2) Insert OBD II wire to vehicle DLC.

2.4 Product Setup

Carry out the adjustment and setting for the decoder as below:
(1) Language: Select the required language.
(2) Measurement unit: Set the measurement unit as imperial or metric units.
(3) Contrast adjustment: Adjust the contrast of LCD display screen.
Enter setting menu
The second start screen, press Up/Down enter the system setting menu. Adjust and set by the following
setting options.

(1) Language setting

Press Up/Down button to select the language, and then press Return/Confirm button to save the
1
selection.
(2) Measurement unit
Measurement unit is metric unit by default.
Press Up/Down button to select measurement unit, and then press Return/Confirm button to save the
1
selection.
Contrast adjustment
(3)
Press Up/Down button to select the contrast, and then press Up/Down button to adjust the contrast.
1
4