Automatic Switching Off - Fabita FC 64 B Bedienungs- Und Montageanleitung

will show power level 5. The power of the
single cooking zone can be adjusted in 9 +
Booster, different positions and will be shown
on the relative luminous display with a level
from «1» to «9» or «b» (booster).
• BOOSTER « b »
This feature enables a cooking zone to reach
extremely high power; in fact, the Booster is
a power level that goes beyond the "9" level.
• CONTROL LOCK «Lock»
Controls can be locked in order to avoid any
risk of unintentional setting changes (due
to children, cleaning operations, etc.). To
activate this function, press and hold the Lock
key. The Timer display will show the flashing
"Lo" symbol to indicate that the function is
active. When the control lock is active, it is still
possible to switch the hob off. To deactivate
the control lock function , press and hold the
Lock key for 2 seconds.
• COOKWARE DETECTION « »
This hob is equipped with a cookware
detection system. Each induction cooking
zone has a cookware detection minimum
limit, which varies according to the material
of cookware being used. For this reason, the
most suitable cooking zone for the diameter
of your cookware must be used.
If the symbol « » appears on the display of a
cooking zone, this means that:
• the cookware used is not suitable for
induction cooking.
• the diameter of the cookware used is lower
than the one allowed by the appliance.
• there is no cookware on the cooking zone.
• RESIDUAL HEAT «H»
If the temperature of the cooking zone is still
high (over 50°) after it has been switched
off, the relative display will indicate the «H»
symbol (residual heat). The symbol will only
switch off when the burn risk in no longer
present.
• TIMER
This function allows establishing the time
(from 1 to 99 minutes) for automatically
switching the selected cooking zone off.
To activate the Timer on a cooking zone:
select the zone, adjust the power and press
the Timer key within 6 seconds. The timer
display shows the default value «30» (10
minutes). Adjust the zones value within 6
seconds using the [+] and [-] keys. keys [+]
and [-] keys within 6 seconds to adjust the
units value. The cooking zone on which the
timer has been activated is indicated by a
steady led at the corner of the Display.
An acoustic signal will indicate the timer
expiration and the relative cooking zone will
automatically switch off. Press any of the
keys to stop the acoustic signal.
In order to disable the timer on a cooking
zone, select it, press the Timer key to enter
the timer function then press the [-] key until
reaching position «00». Press the Timer key
to confirm.

• AUTOMATIC SWITCHING OFF

The appliance is equipped with a safety
system that automatically switches off the
cooking zones after the switch-on limit time
at a given power, has elapsed.
POWER MANAGAMENT SETTING
The hob is equipped with a power manage-
ment function to limit the total maximum
power.
There are 5 power supply levels: 2.5kW, 3.5kW,
4.5 kW, 5.5 kW, 7.2 kW.
• INPUT SETTING PROCEDURE:
It is not necessary to place any cookware on
the heating zones.
It is recommended to start the setting
procedure within 5 seconds after connecting
the hob to power supply. The input setting
process mode is activated by holding down
the timer control and pressing the Lock
control three times.
15