Maintenance And Cleaning; Technical Data - Conrad LS6300E Bedienungsanleitung

Summary: settings
When the setting has been confirmed, an audio signal sounds.
Setting
Output
OUTPUT MODE - KEYBOARD/USB
Reading
SINGLE SCAN
SINGLE SCAN NO TRIGGER &
LASER TIMEOUT - 5 SECONDS
SINGLE SCAN NO TRIGGER &
LASER TIMEOUT - 2 SECONDS
Verification
CODE 11, 39, 93, 128, I2OF5, ID2OF5,
MSI, UPC/EAN
DOUBLE CHECK - ENABLE / DISABLE
(ENABLE = function on; DISABLE =
function off)
Image
REVERSE IMAGE – ENABLE / DISABLE
(ENABLE = function on; DISABLE =
function off)
Code ID
SEND BAR CODE ID - DISABLE
SEND BAR CODE ID - RESET
SEND BAR CODE ID - AS A PREFIX
SEND BAR CODE ID - AS A SUFFIX
Keyboard language setting (country language setting)
Setting keyboard language (for alphanumeric barcodes, such as Code 128):
DENMARK, FINLAND, FRANCE, GERMANY, ITALY, LATIN AMERICA, NETHERLANDS, NORWAY,
POLAND, SPAIN, SWITZERLAND (FRENCH), SWITZERLAND (GERMAN), SWEDEN, UNITED
KINGDOM, UNIVERSAL, UNITED STATES (USA)
Symbologies on/off [ 1 ]
CODE 11 - ENABLE / DISABLE
(ENABLE = function on; DISABLE =
function off)
CODE 39 - ENABLE / DISABLE
FULL ASCII - ENABLE / DISABLE
CODE 93 - ENABLE / DISABLE
CODE 128 - ENABLE / DISABLE
CODE 128 ISBT - ENABLE / DISABLE
CODABAR - ENABLE / DISABLE
Symbologies on/off [ 2 ]
I2OF5 - ENABLE / DISABLE
ID2OF5 - ENABLE / DISABLE
MSI - ENABLE / DISABLE
UPC-A ENABLE / DISABLE
UPC-E ENABLE / DISABLE
EAN-13 ENABLE / DISABLE
EAN-8 ENABLE / DISABLE
Function
Transfer via USB
Single read, laser turns off after reading.
Press release button. Laser stays on for 5 seconds and
then turns off after reading.
Press release button. Laser stays on for 2 seconds and
then turns off after reading.
Scanner reads barcode twice, with automatic comparison.
With a matching result, it will be transferred to the
computer.
With standard settings, reads black-on-white barcodes.
This function activates the reading of white-on-black
barcodes.
Turns transmission of barcode ID off.
Reset barcode ID.
Adds barcode ID as a prefix.
Adds barcode ID as a suffix.
Activate/deactivate symbology CODE 11.
Activate/deactivate symbology CODE 39.
Activate/deactivate symbology FULL ASCII.
Activate/deactivate symbology CODE 93.
Activate/deactivate symbology CODE 128.
Activate/deactivate symbology CODE 128 ISBT.
Activate/deactivate symbology CODABAR.
Activate/deactivate symbology I2OF5.
Activate/deactivate symbology ID2OF5.
Activate/deactivate symbology MSI.
Activate/deactivate symbology UPC-A.
Activate/deactivate symbology UPC-E.
Activate/deactivate symbology EAN-13.
Activate/deactivate symbology EAN-8.

Maintenance and cleaning

• Before cleaning, disconnect the product from the computer.
• The product requires no servicing on your part aside from occasional cleaning. Use a soft, anti-static and
lint-free cloth.
• Do not use any chemical or abrasive cleaning agents.
• Do not scratch the safety glass of the reader (4).
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.

Technical data

Supply voltage . ................................... 5 V/DC via USB 2.0/3.0
Current consumption .......................... 65 mA
Laser class ......................................... Class 1
Wavelength . ........................................ 650 nm
Scan speed . ........................................ 100 scans / second
Depth of field ...................................... 500 mm (X dimension: 40/1000")
Scanning angle . .................................. 38°
Ambient light . ...................................... max. 30000 lux (natural light)
Required contrast ............................... 45 % (between thrust face and barcode)
Symbologies . ...................................... UPC / EAN / JAN, Codabar, Code 11, Code 39, Code 93, Code 128,
MSI, I2OF5, ID2OF5
Operating conditions . .......................... 0 to +50 °C, 10 – 85 % RH (non-condensing)
Storage conditions . ............................. -20 to +60 °C, 5 – 95 % RH (non-condensing)
System requirements . ......................... W indows
32 bit, Vista™ (32 / 64 bit), 7 (32 / 64 bit), 8, 8 Pro, Enterprise, RT,
Mac OS X 10.8.2 (Mountain Lion)
Dimensions (W x H x D) ..................... 60 x 160 x 90
Weight ................................................ approx. 110 g (without USB cable)
These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Straße 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2013 by Conrad Electronic SE.
2000, XP (Home, Pro, with SP1, SP2, SP3), only
®
V2_1013_02-JH