AsViva EKC2 Betriebsanleitung Seite 37

ASSEMBLY
ATTACH THE MOTOR HOODS AND SEAT
1. Install the seat by placing the tabs on the back of the seat into the designated holes/slots in the
vehicle body.
2. Tighten two M5X16 machine screws to secure the seat to the vehicle body.
x4
3
Tabs on back of seat
4
1. Fit the motor hood on the motor inside the
2. Insert four Ø4x12 screws and tighten.
Repeat the procedure for the other motor hood
2
vehicle.
1
37