AsViva EKC2 Betriebsanleitung Seite 35

ASSEMBLY
ATTACH THE STEERING WHEEL
1. Open the battery compartment cover.
2. Insert two 1.5 V AA batteries (not included). Observe the correct polarity.
3. Then replace the battery compartment cover.
End of steering column
1. Remove the M5x35 machine screw and the Ø5-nut the steering wheel.
2. Place the steering wheel on the steering column protruding from the center of the steering wheel base.
Align the steering wheel centrally.
3. Fasten the steering wheel with the previously removed bolts and nuts.
3
4 2
6
1
7
35