To Install A Hp10 Network Card Into - Compex HP10 Installationsanleitung

5. Carefully insert the HP10 network card in the open PCI slot.
Hold the card by its edges, and align the connector pins at the bottom
of the card. Press it gently but firmly straight into the slot. If the card
would not "snap" into the slot, pull it out and try again.
6. Replace the slot cover screw to secure the card in place.
7. Close the case.
8. Plug in the power cord to the computer.
To install a HP10 network card into another computer:
Take your network card to the next computer and repeat the installation
steps. Then connect your phone cables as described below before starting
the computer.
2 Compex HP10 Network Adapter English