Tcp/Ip Configuration - Compex HP10 Installationsanleitung

TCP/IP Configuration

Step 1 From the Win95/98 Start Button, select Settings, and then
Control Panel. The Win95/98 Control Panel displays.
Step 2 Double-click on the Network icon as below,
and you will see the diagram as below
Installed components
Look for TCP/IP
Add button
Step 3
Check your list of Network Components in the Network
window Configuration tab. If TCP is not installed, install it now.
Select the Add button and you will see below figure. If TCP/IP
is installed, go to Step 8.
English Compex HP10 Network Adapter
.
13