Compex HP10 Installationsanleitung Seite 18

Step 4
Select "Protocol" and click "Add.." button. Then you will see
the figure as below.
Step 5
Select "Manufacturers" as "Microsoft" and "Network
Protocols" as "TCP/IP" (as shown on above diagram) and click
"OK". You may need your Win95/98 CD to complete the
installation.
Step 6
After you install TCP/IP, go back to the Network window.
Select TCP/IP in the list of Network Components.
Step 7
Click Properties, and check the settings in each of the TCP/IP
Properties window
14 Compex HP10 Network Adapter English