Troubleshooting - hanseatic HB6055KA-GS Gebrauchsanleitung

Troubleshooting

Malfunctions can occur in all electrical appliances. This does not nec-
essarily mean there is a defect in the appliance. For this reason, please
check the tables to see if you can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective applian-
ce yourself. You can put your own and future users' lives in
danger. Only authorised specialists are allowed to carry out
this repair work.
Problem
The hand
blender isn't
working.
The cutting
blades are
jammed.
Heat, smoke
and an unusual
smell occur
while blending.
Possible cause
The hand blender is
locked.
You are trying to blend
too much food.
The food is sticking to
the cutting blades.
You are trying to blend
too much food.
You are using the hand
blender longer than the
permitted period of one
minute.
The food you are
blending is too hot.
Troubleshooting Page EN-23
Solutions, tips
Press the safety
switch (1) and then the
power switch (2).
Reduce the amount of
food.
Remove the drive unit
and free the cutting
blades from the food.
Reduce the amount of
food.
Reduce the time to one
minute and then let
the hand blender cool
down for at least three
minutes.
Make sure that the food
is not hotter than 60 °C.