Operating Instructions Wireless For Dmx-Control - Carpetlight CL21 Bedienungsanleitung

OPERATING INSTRUCTIONS FOR WIRELESS DMX-
CONTROL
The control unit features an internal CRMX interface to enable wireless DMX control.
The status led shows the network status of your control unit:
Status-LED link: [off] no network configuration; [fast flashing] network configured, but
no active wireless connection
Status-LED radio: [slow flashing] active wireless connection, but no DMX signal; [on
continuously] active wireless connection, DMX signal present
When delivered, the interface default settings are not preset for a specific network.
The connection to a free network is done automatically when the master unit is
scanning for new clients. To separate the control unit from a network, press the link
switch for more than 3 seconds.
To set the DMX address of your control unit, please use the main menu as described
in menu items 2. and 3.
Operating the control unit in wireless DMX mode will override the cable and manual
function. Wireless DMX will mode always have priority over other DMX modes.
Operating the control unit in cable DMX mode (using the 5pin XLR connectors) will
overwrite the manual control.
29