Operation Of The Control Unit; Connecting The Control Unit; Main Supply,ꢀ ꢀ 90-240 ꢀ ꢀ V Olt; Mount Operation - Carpetlight CL21 Bedienungsanleitung

OPERATION OF THE CONTROL UNIT

The control unit is connected using the supplied headfeeders:
CL21: 5 pole headfeeder
CL42/CL44: 6 pole headfeeder
CL84/CL8x8: 4 pole headfeeder
ATTENTION: ꢀ ꢀ D o ꢀ ꢀ n ot ꢀ ꢀ t wistꢀ ꢀ or ꢀ ꢀ t urn ꢀ ꢀ t heꢀ ꢀ headfeeder connectors since the plugs and
sockets of the headfeeders are push /pull connectors. For CL40 series disengage by
pulling back the center shell of the plug. Note that the 6 pole headfeeder has an
additional interlock to avoid uncontrolled ꢀ ꢀ u nplugging. ꢀ ꢀ W hen ꢀ ꢀ i nserting ꢀ ꢀ t he ꢀ ꢀ p lug ꢀ ꢀ i nto ꢀ ꢀ t he
ꢀ ꢀ s ocket ꢀ ꢀ m akeꢀ ꢀ sure ꢀ ꢀ t he ꢀ ꢀ a rrow ꢀ ꢀ m ark ꢀ ꢀ o nꢀ ꢀ the plug is pointing upwards. Take note of the
white marker.
The SpeakOn-DC connector is a lockable slewing mechanism. Plug the connector into
the ꢀ ꢀ s ocket ꢀ ꢀ b y ꢀ ꢀ fi nding ꢀ ꢀ t he ꢀ ꢀ c orrectꢀ ꢀ slotꢀ ꢀ andꢀ ꢀ then, with ꢀ ꢀ s light ꢀ ꢀ p ressure,ꢀ ꢀ turnꢀ ꢀ to ꢀ ꢀ t he ꢀ ꢀ r ight.
To disconnect, retract the silver slider, then slightly rotate left, then unplug the cable.
Connect the SpeakOn DC plug of the power supply to the SpeakOn socket (DC IN) by
inserting and twisting right. (To unplug pull the top lever back and twist left).
After that, connect the power supply to the mains outlet with the supplied AC cable.
Connect the SpeakOn DC plug of the supplied V-mount adapter to the SpeakOn socket

Connecting the control unit

Different ways of connecting the power supply:
Mains supply 90-240 Volt
V-mount operation
25