Operation Of The Control Unit; Mains Supply 90-240Volt; V-Mount Operation - Carpetlight CARPETINO Bedienungsanleitung

OPeRAtiOn Of the COntROl unit

Lamp-Socket DMX DMX DC in
3 pole IN OUT Speakon
The control unit must be connected to the lamp body using the supplied 3 pole control
cable. Do not twist or turn the connectors!
The plugs and sockets are push/pull types.
there are different types of power supply:

mains supply 90-240Volt

Connect the DC barrel connector of the power supply to the DC socket (DC IN) of the
control unit. The DC barrel connector has a lockable slewing ring. Insert the connector
into the socket on the control unit and twist slightly right or left.
To unplug, turn the connector to the left or right. And pull gently out.
The power supply adapter and the control unit can be assembled into a compact unit.
Attach together by connecting the V-mount adapter to the power supply adapter on
the control unit.

V-mount Operation

The CARPetinO control unit can be run using V-mount batteries (minimal 9A discharge
current). To do this there is a V-mount connector on every control unit.
22