Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WIRED CONNECTIONS
WARNING :
The connections shown below may vary, depending on the
television model.
REAR PANEL OVERVIEW
LAN
OPTICAL
1
2
DOWNWARD-FACING CONNECTORS
AC-IN power cord. Plug this television into a 100-240V ~ 50/60Hz
electric grid
1. LAN. Plug this connector into your router or residential gateway
to establish an Internet connection.
2. OPTICAL. Optical audio output, for audio signal transmission
without loss of quality.
3. AV / L / R. Audio video connection. AV jack for video and L/R for
audio (Left/Right). An HDMI connection is preferable if your
equipment has one.
4. AIR. Terrestrial antenna jack for receiving DVB channels. Connect
a wall antenna outlet with an RF cable (75 ). To ensure better
reception, we strongly recommend using an outdoor antenna.
SIDE CONNECTORS
5. HDMI Ports. This television is equipped with 3 HDMI ports.
HDMI ARC function is available on HDMI port 1.
Limit the number of cables in your installation using the ARC
(Audio Return Channel)! If you have an ARC-compatible home
cinema, simply connect it to this television's HDMI ARC jack. In
home cinema mode, the image and sound from the video player
will be transmitted to the television; conversely, from the television
(in DVB mode for example), the sound will be transmitted to the
home cinema, all through a single cable.
Once your equipment is connected, simply activate your television's
ARC sound output. To do this : press the button
control, then click on the icon
the Audio option, then Audio Output and set the Audio output to
ARC mode. You may also need to set your home theater or soundbar to
ARC mode.
26
AV
L
R
AIR
3
4
on the remote
at the top left of the screen. Select
www.eklyps.tv
6. USB ports 1 and 2. The two USB ports support MP3 audio
formats, photos in JPEG format, and videos in MPG or MKV formats.
7. EARPHONE. 3.5 mm headphone jack.
8. CI (Common Interface) card slot. Card reader required for
certain premium channels.
TELEVISION CONTROL BUTTONS
The indicator light is located on the front left. It is red when the
8
television is on standby, ashes when it starts up, and green when
7
it is on. The remote control sensor is located on the right. Make sure
not to obstruct it.
Television control buttons for reference : EK32HX300V,
6
EK32FX300V, EK40FX300V, EK43UX300V, EK58UX300V, EK50UX300V,
5
EK65UX300V.
5
7
5
1
2
3
4
5
6
Television control buttons for reference : EK32HX300VS,
EK32FX300VS, EK43UX300VS, EK50UX300VS.
1
3
5
7
1-2. VOL +/- : allows you to increase or decrease the listening volume.
3-4. CH+/- : allows you to change the channel being viewed.
5. SOURCE : allows you to switch between di erent devices connected
to the television: DVB mode, HDMI 1-3, AV, USB ports.
6. MENU : allows you to access the television settings menu.
7. POWER : allows you to turn the television on or put it in standby mode.
Copyright © 2022. EKLYPS. All rights reserved.
2
4
6
Werbung
Inhaltsverzeichnis
