Before Operation; Setting The Clock - Sharp YC-MS02E Bedienungsanleitung

BEFORE OPERATION

• Plug in the oven. The oven display will display: "0:00", an audible signal will sound once.
• This model has a clock function and the oven uses less than 1.0 W in stand by mode. To set the clock, see below.

SETTING THE CLOCK

Your oven has a 24 hour clock mode.
1. Press the CLOCK SET key
2. Press the time keys and enter the current time. Enter the hours by pressing the 10 min key and enter the minutes
by pressing the 1 min and 10 s keys.
3. Press the CLOCK SET key
NOTES:
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not been
set, the display will only show "0:00" when cooking is complete.
• To check the time of day during a cooking process, press CLOCK SET key and the LED will display the time of day for
2-3 seconds. This does not aff ect the cooking process.
• While in the clock setting mode, if the STOP key is pressed or if there is no operation within 1 minute, the oven will
go back to the former setting.
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show "0:00" after
the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be
erased.
once and "00:00" will fl ash.
to fi nish clock setting.
EN – 14 EN – 14