Osd Setting - Maximum XO-410 combo Gebrauchsanleitung

- CVBS: Some TV sets may not support RGB. Choose CVBS if you TV
does not support RGB.
- COMP HD: Please select this format only, if the connection is made by
component out (YPbPr).
- COMP SD: Please select this format only, if the connection is made by
component out (YPbPr).
• Aspect ratio: Choose whether you TV is 4:3 or 16:9 (widescreen).
• Display Format: If you select the display aspect ratio of TV as "4:3", then
also the preferred aspect ratio conversion scheme for cases in which the
transmitted programme is in 16:9-format can be chosen. The options are:
- Pan & Scan: The receiver will adapt the 16:9 signal to fit on a 4:3 TV.
- Letterbox: In this mode the original aspect ratio of the 16:9 input video
signal is preserved, thus there are vertical black bars on the top and
bottom of the screen.
- Ignore: Use this setting, if your TV set handles the aspect ratio
conversion.
• Resolution: The available resolutions are: 576p, 720p, 1080i and 1080p (by
choosing 1080p you will have to confirm your choice by pressing 1 on the
remote control as it is not all TVs that supports 1080p)
• AC3: This is the optical digital sound output. Choose between: Off, SPDIF
and SPDIF + HDMI.

10. 6 OSD Setting

You can adjust the display time (time of
the appearing of the info bar) and the
transparency of the menus.
29
ENGLISH