Safety Instructions - fun pro 1 Bedienungsanleitung

EN
8

SAFETY INSTRUCTIONS

• The scooter must be assembled by an adult.
• Screws and other moving parts should be checked regularly for fit and
function.
• The scooter may only be used by one person at a time
• It is advisable to wear safety equipment such as helmets and protectors -
especially at the beginning when the riding characteristics are not yet so
familiar.
• Guide your child at the beginning and only let him/her ride alone when you
are sure that he/she can handle the scooter sufficiently.
• The scooter rides wonderfully in dry weather. When the road is wet and
it is raining or there is other precipitation, the brakes no longer function
as usual and the driving characteristics can also change in other ways. We
therefore recommend not to drive in precipitation and wet conditions.
• One fun per scooter can be fast - but with speed comes the risk of falls.
We therefore recommend that you only ride as fast as you can safely
dismount. Explain to your child that speed also involves risks.
• Regularly check the correct fit of all screws and connections.
• Please do not make any modifications to the scooter. We can only
guarantee the usual fun pro quality and safety in factory condition.
NOTES ON THE WHEELS
The wheels of this scooter are equipped with ABEC7 bearings. These are
greased semi-automatically and then encapsulated. Due to different degrees
of filling, it may be that the wheels turn differently easily without load. This is
not a quality problem! As soon as the scooter is on the ground and loaded, the
wheels turn normally.