Anti-Grease Filter; Settings - GLOBALO Silentio 60 Gebrauchs- Und Montageanleitung

EN

ANTI-GREASE FILTER

The hood is equipped with an aluminium filter which partially traps grease particles. You can
wash the filter manually by immersing it for 15 minutes in 40-50ºC water with dishwashing liquid.
After 15 minutes, wash and rinse the filter thoroughly. Dry well before placing it back in the hood.
You can also wash it in a dishwasher. After cleaning, you may notice a slight discolouration of
the filter, which does not affect its properties. A regularly cleaned filter will help to maintain the
efficiency of the hood and prevent the risk of fire.
SETTINGS (BUTTONS ON THE HOOD OR REMOTE CONTROL)
1 2 3 4 5
6
LED display
The selected speed level (1,2,3,4) will be shown on the display 1 .
Speed adjustment
Pressing the minus „–" button will decrease the speed of the turbine.
2
Pressing the plus „+" button swill increase it.
4
Switching the hood motor on and off
The hood motor can be started in 3 ways:
3
1. Pressing the button - the motor will switch on at the same speed level at which it was
switched off.
2. Pressing the minus „–" button - the motor will switch on at the minimum speed level.
2
3. Pressing the plus „+" button - the motor will switch on at the maximum speed level.
4
Switching the lighting on and off
5
To turn the hood lighting on, press . Pressing the button again turns the lighting off.
32