Eleglide M1 Bedienungsanleitung Seite 14

EN
Please check the following issues before sending to designated repair
offices.+
Problem
Display does not work/
Vehicle can not turn on
Front light does not
work
Battery does not charge
Insufficient Range
Motor does not work
12
Possible Causes
a. No power supply for
vehicles.
b. The electric wire is not
plugged in properly
c. Display is damaged
d. Controller burnout or
water damage
a. Wire is not plugged in
properlyte
b. It is damaged
a. Charger is not plugged in
properly
b. Battery if out/below of
temperature site.
c. Battery is under rated
voltage
a. Battery is not in full
charge.
b. Tyre pressure is low
c. Frequent braking
d. Battery aging or
attenuation
d. Low ambient
temperature, battery
capacity attenuation.
a. Brake lever does not back
properly
b. The electric wire is not
plugged in properly
c. Sensor / controller is
inefficient
Solutions
a. Charge the battery
b. Reconnect the electric
wire properly
C & d. Contact the
re-seller for helping to
solve it.
a. Plug the wire in
properly.
b. Contact re-seller.
a. Plug in properly and
charge.
b. Make sure it is the
resume Charging
temperature.
c. Contact re-seller.
a. Charge the battery
fully.
b. Check the pressure
before every use.
c. Develop good drive
habits.
d. It' s normal.
a. Readjust brake lever
b. Plug the electric wire
in properly.
b. Contact for help.