Purpose Of The Manual - Ecotech Italia K34 Predator Betriebs- Und Wartungsanleitung

PURPOSE OF THE MANUAL

– This manual has the aim of transferring
the "Instructions for use" to the Opera-
tor, to prevent and minimize risks during
the man-machine interaction.
– This manual aims at providing those
who need to interact with the machine
(carriers, retailers, service centres, etc.)
with the necessary information.
EN
– It is important to dedicate enough
time to read the "Instruction Manual"
in order to minimise the risks and to
avoid any unpleasant accidents.
– In some cases, accidents may be due
to the Operator using the machine
carelessly.
– Caution is always necessary. Safety
is also the responsibility of all the
persons interacting with the machine
throughout its operating life.
– Remember that it is too late to think
about safety issues when the acci-
dent has already occurred.
– The content of this manual was original-
ly edited by the Manufacturer in the
mother tongue (ITALIAN), in compliance
with the professional writing standards
and the regulations in force.
– Any translation of the manuals shall be
carried out directly and without altera-
tions from the texts of the ORIGINAL
INSTRUCTIONS.
– This applies also to the translations car-
ried out by the agent or by the person
who is in charge of delivering the equip-
ment in the specific linguistic area.
– Keep the manual and the attached doc-
uments in a place known and easily
traceable, so that you may refer to them
whenever necessary.
– To easily find out the specific topics of
interest, read the table of contents and
the index.
– Some information may not correspond
entirely to the actual configuration of the
machine delivered.
– The Manufacturer reserves the right to
make any changes to the information
provided without notice provided the
safety standards are not affected.
– All information supplied by the recipients
represents an important contribution to
the improvement of the after-sales ser-
vice that the manufacturer will offer to
his/her customers.
– Some symbols have been adopted to
highlight parts of the text of this manual
and relevant characteristics. Their de-
scription is as follows.
Danger - Warning
This symbol indicates potentially haz-
ardous situations which, if ignored,
could cause serious harm to personal
health and safety.
Caution - Precaution
This symbol indicates that adequate ac-
tions must be taken to avoid harm to
personal safety and health and econom-
ic damages.
Important
This symbol indicates critical technical
and operating information that shall be
observed.
NOTE
The symbol is used to strengthen the
concept of reference information.
76