Functions Description - Berger & Schroter 12MP X-trail Bedienungsanleitung

Main Menu Default
Setting
1. User Label OFF
2. Camera + Video OFF
3. Multi-Shot 1P
4. Image Size 5MP
5. Video Size 640
6. Video Frame 30FPS
7. Digital Zoom NO
8. Video Length 5 Sec
9. PIR Sensitivity Middle
10. Timer OFF
11. Time Lapse OFF
12. Delay OFF
13. Audio Recording ON
14. TV Out N
15. Stamp ON
16. Frequency 50Hz
17. Language English
18. Time/Date 01/ 01/ 2011 Date/Time; Date: "month/ date/ year"; Time: "hour/minute"
12: 00
19. Camera Sound ON
20. Cycle Recording OFF
21. Password OFF
22. Reset No

5. Functions Description

Functions Description
Select "ON" to set 4 digits/ alphabets for each camera. Such function can
help user to identify photos are from where and which camera.
Select "ON", camera shoots photo(s) first, then video upon same trigger
event based on Video Length and Multi-shot user configured.
Optional 1/2/3/4/5/6/7 photos per trigger
12MP/8MP/5MP - 4000x3000, 3264x2448, 2592x1944
HD/640/320: 1080x720/640x480/320x160
30fps/15fps, programmable
Lens focus room in 2/ 3/ 4 times.
5-60s video clips
High/ Middle/ Low;
Higher sensitivity is 1) more sensitive to movements by smaller subjects; 2)
longer detection distance; 3) easier for sensor to detect difference between
body heat and outdoor temperature; 4) easier to trigger camera to record. In
high temperature environment, body heat of subjects and environment
temperature is hard to tell by camera, suggest set High.
Select "ON", to set the beginning time and end time (hour/minute); camera
will only work during the time user set.
Select "ON", to set the interval; PIR sensor of camera will be turned off;
camera will shoot pics or video clipsautomatically upon the interval user set.
Configurable interval: 5 seconds to 24 hours.
The pre-set time interval you desire between photo/video recordings upon
motion. This option prevents from taking too many photos or videos.
Example: Camera will wait 1 minute between photo/video recordings with
motion Configurable delay time: 5 seconds to 2 hours.
Select "ON", audio available in video clips.
NTSC/PAL
To select or cancel imprinting of programmed user label, moon phase,
temperature, date, and time on photos.
Improper setting may cause camera screen flicker
English...
Select "OFF" to turn off camera speaker.
Select "ON", camera will continue to record photos/videos by deleting
earliest photos or video clips recorded in SD card.
Select "ON" to enable password protection for your camera; support totally
6 digits/ alphabets long password access.
Select "Yes" to reset camera back to factory default setting.
21