Quick Start; How To Start The Camera; How To Set The Functions - Berger & Schroter 24 MP X-trail pro Bedienungsanleitung

3.1 How to Start the Camera? Switch ON "Power Switch"
HNote: Camera comes pre-programmed with factory default settings. So for test purpose, user only
needs to insert a SD card and batteries to start test by powering on.

3.2 How to Set the Functions?

a. Switch to "Setup", camera LCD screen is lightened, camera enter Test Mode.
use navigation buttons" ", "↑", "→", or "↓"to obtain favored settings;
press "OK" for confirmation and save the preferred change, press "Menu" to exit current page.
b. Switch to "ON", camera LCD screen off, camera enter PIR Auto Mode.
c. Camera LED indicator flashes 5 times before it gets into PIR auto working
mode.
Note: For some settings, user needs to press "Menu"to save & exit the configuration after pressing
"OK"to confirm (Cam ID, Delay, Time Lapse, Timer, Password)
3.3 Camera Default Settings in
Auto Modes
Hunting
ON/OFF
Security
ON/OFF

3. Quick Start

Red Letter
Cam Name
OFF/ON
Image Size
12MP/16MP/24MP
Video Size
FHD/HD/VGA
SD Cycle
OFF/ON
23
Setup
Language
English...
Date/Time
YYY/MM/DD
HH:MM
Caméra ID
Mode caméra
Picture/Video/PIC+Video
Image Setup
Video Setup
Video Length
SS 05-60 secs
PIR Sensivity
High/Middle/Low
Timer
OFF/ON
Timer Lapse
OFF/ON
Delay
OFF/ON
Battery Type
Alkaline/NI-MH
Other
Reset
No/Yes
Àbout
Version:
Password
OFF/ON
Multi-Shot
1 P-7 P
Video Frame
30FPS/15FPS
Frequency
50Hz/60Hz