HIKMICRO Warmebildkamera Kurzanleitung Seite 4

Component
Back Button
Focus Knob
Trigger
Autofocus
Cable Interface
3. Charge Device
After the device starts up, the OSD (on-screen display) shows the battery status. When the battery is low, charge
the device and ensure it works properly.
For the first charge, charge the device for 10 hours when the device is turned on.
3.1 Charge Device via Cable Interface
Steps
1. Lift the cover of interface.
2. Plug in the cable, and charge the device.
3.2 Charge Device via Charging Base
You need to purchase charging base.
Steps:
1. Hold the device, and press both battery lock catches
of the device.
2. Hold the lock catches, and draw the battery base to
take out the battery.
3. Insert the battery into the charging base. You can
see the charging status via the pilot lamp on the
charging base.
4. When the battery is fully charged, draw the battery
from the charging base.
5. Insert battery into the device.
4. Mount Protective Cover
Attach the protective cover when the device is not in use.
Exit the menu or return to previous menu.
Adjust lens focal length.
Pull the trigger to capture or scan the QR code.
Hold the trigger to record videos.
Pull the trigger to turn on/ off autofocus function.
Charge the device or export files with supplied cable.
Function
2