Operating - tibelec EM907 Gebrauchsanweisung

IMPORTANT: these instructions are for
GB
your safety. Read them carefully before
use and keep them for future use.
Avertissement :
1. Be particularly careful when using voltages above
30VACrms or 60VDC to avoid damage or electric shock.
2. Never use the tester if it is damaged or broken. Make
sure it is never wet or damp; check that the tester is
working properly before commissioning.
3. Opening the housing gives access to hazardous voltage
conductive parts. Any action on internal circuits could
result in hazardous use. Never use the disassembled
tester.
4. This tester does not detect ground/neutral inversion.
5. The indicators may sometimes light up dimly depending
on the distributed capacitance of the electrical
installation.
6. The duration of the test does not exceed 1.5 minutes.
1. Légende :
L
N
E

Operating

2.
To test wall sockets easily and safely. Automatically and
quickly indicates whether the installation is correct.
6
:
Live
:
Neutral
:
Ground
:
: reverse
:
on
: off