Installing An Expansion Card; Installing An Optical Drive - Asus P3 Serie Installationshandbuch

Installing an expansion card

1. Lift the expansion card
lock to a 90º-100º angle.
. Remove the metal cover
opposite the slot that you
intend to use.
3. Insert the card connector
to the slot, and press the
card firmly until it fits in
place.

Installing an optical drive

1. Drive a screw to the screw hole on
both sides of the optical drive.
. Connect the IDE/SATA signal plug
(A) and IDE/SATA power plug (B)
to the connectors at the back of the
IDE/SATA optical drive.
3. Push the drive all the way into the
bay until the drive lock clicks.
B
3
Installing a SATA hard disk drive
1. Drive two screws with rubber
washers on both sides of the hard
disk drive.
NOTE: Before using the hard disk
drive screws, put the supplied rubber
washers onto the screws.
1
1
A
IDE
1
Installation manual
3

A
B
3
SATA
7