Installing An Expansion Card - Asus Pundit P1-AH1 Schnellinstallationsanleitung

Installing an expansion card

1. Lift the PCI riser card
assembly to remove.
3. Insert the card connector to
the slot, then press the card
firmly until it fits in place.
Secure the card with a screw.
Installing optical and storage drives
1. Turn the storage drive assembly upside down with the 3.5-inch bay on
top of the 5.25-inch bay.
2. Insert the optical drive upside down to the 5.25-inch bay, then secure
it with two screws on both sides.
3. Turn the storage drive assembly, insert the hard disk drive upside down to
the 3.5-inch bay, then secure it with two screws on both sides.
2 2 2 2 2
6 6 6 6 6
2. Remove the metal cover
opposite the slot that you
intend to use.
4. Reinstall the PCI riser card
assembly. Make sure that the
riser card connector sits properly
on the motherboard PCI slot.
3 3 3 3 3
Q u i c k i n s t a l l a t i o n g u i d e Q u i c k i n s t a l l a t i o n g u i d e
Q u i c k i n s t a l l a t i o n g u i d e Q u i c k i n s t a l l a t i o n g u i d e Q u i c k i n s t a l l a t i o n g u i d e