Cleaning And Care; Declaration Of Performance - Hornbach 10476778 Gebrauchsanweisung

Cleaning and care

Dust and dirt will collect on the awning and will re-
quire periodic cleaning. Use a water/detergent mixture
and a soft clean cloth to clean the awning.
In most situations it should not be necessary to lubri-

Declaration of performance

DOP-104767781-CPR, Version 20220103
1. Unique identification code of product type:
-
Louvered roof pergola 3.0 x 3.0 (10476778)
-
Louvered roof pergola 3.0 x 4.0 (10476780)
2. Type, batch or serial number or other label for the
identification of the product referred to in Article 11 /
Paragraph 4:
10476778, 10476780
3. The manufacturer's intended use or intended uses
of the product in accordance with the applicable har-
monized technical specification:
Application in the exterior of buildings and other
structures
4. Name, registered trade name or registered trade
mark and contact address of the manufacturer in ac-
cordance with Article 11 / Paragraph 5:
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim/Germany
www.hornbach.com
5. Where appropriate, the name and contact address
of the authorized representative, responsible for the
tasks referred to in Article 12 / Paragraph 2:
Not relevant
6. System or systems for the assessment and verifi-
cation of the reliability of performance of the product
according to Annex V of the Construction Products
Directive:
System 4
cate the moving components of the awning. However,
when squeaking occurs, the use of a silicone spray
lubricant is recommended. Important: Do not use any
petroleum based spray lubricant.
7. Not relevant (for System 4 there is no notified body).
8. Not relevant.
9. Declared performance
Main features Performance
Resistance to Class 2
wind loads
Total energy NPD
dissipation g
tot
10. The performance of the above product corresponds
to the declared performance/s as defined in No. 9. The
above manufacturer is solely responsible for the prep-
aration of the service declaration in accordance with
Regulation (EU) No. 305/2011.
Signed for the manufacturer and on behalf of the manu-
facturer by:
Andreas Back
Head of Quality Management, environment & CSR
Person authorised to compile the technical file
Bornheim, 03.01.2022
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
Harmonized techni-
cal specification
EN 13561
ENGLISH | 217