HEIDELBERG AMPERFIED Wallbox connect.home Betriebsanleitung Seite 37

1
Meaning of the Status LED
Charging operating states
LED flashes white
LED lights up blue
LED lights up
yellow
LED lights up green
LED pulsates green,
and one signal tone
sounds
LED pulsates slowly
Standby and software update
LED inactive
LED alternately
lights up white,
blue and red
RFID enabling and teach-in
LED lights up
purple
LED lights up green
(5 seconds), and
one signal tone
sounds
LED lights up green,
and one signal tone
sounds
LED lights up red
(5 seconds)
Five brief signal
tones
2 3
The charging system has been switched on, and the subsystems are starting up.
Charging system ready for operation (state A).
Charging system not enabled (state B) – external enabling input, RFID, app.
Charging system enabled, and communication with the vehicle established
(state B or C).
Charging process started (state C, and actual current >2 A).
Charging at reduced charging current.
Charging system in standby state.
Software is being updated.
RFID teach-in mode is active.
RFID taught-in successfully.
RFID card accepted.
RFID not card accepted.
4 5
Charging
the vehicle
6 7
English
35