Cleaning; Transport; Storage; Maintenance - Scheppach BSG500 Original Bedienungsanleitung

Charging with the battery charger (Fig. 4)
1. Switch on the power supply by pressing the on/off button (5) for two seconds.
2. Connect the plug of the charging cable to the charging connection socket (11) on the
back of the portable power station and connect the charger. The LCD display indicates
the charging status.

11. Cleaning

Attention!
Switch off the device prior to all cleaning work.
We recommend that you clean the device directly after every use.
Wipe dust off the machine from time to time with a cloth. Do not use any cleaning products
or solvents; they could attack the plastic parts of the device. Make sure that no water can
penetrate the device interior.

12. Transport

For short transport use the transport handle to carry the device.
When transporting the product in a car or similar, please secure the device against moving
during transport. Otherwise, the product may be damaged, resulting in electric shock, heat,
fire, etc.

13. Storage

Store the device and its accessories in a dark, dry and frost-free place that is inaccessible
to children. The optimum storage temperature lies between 0 and 40 ˚C.
Store the tool in its original packaging. Cover the tool to protect it from dust or moisture.
Store the operating manual with the tool.
Do not store the product in the car, trunk, loading platform or other hot place under direct
sunlight. It may cause the product failure, degradation or thermal problem.
Fully charge the product before storage and recharge it at least once every 3 months.

14. Maintenance

The device has no parts that require maintenance.
Connections and repairs
Connections and repair work on the electrical equipment may only be carried out by elec-
tricians.
32 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58