Herunterladen Inhalt Inhalt Diese Seite drucken

Start Up - Scheppach BSG500 Original Bedienungsanleitung

Powerstation
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
DC button (4)
Switch on DC output: Press and hold the DC button over 2 seconds, to switch on the DC
output. The DC indicator will light, and the LCD will display "DC ON".
Switch off DC output: Press and hold the DC button for over 2 seconds, to switch off the
DC output.
The DC indicator will be off, and the LCD will display "DC OFF".
AC button (6)
Switch on AC output: Press and hold the AC button over 2 seconds, to switch on the AC
output. The AC indicator will light, and the LCD will display "AC ON".
Switch off AC output: Press and hold the AC button for over 2 seconds, to switch off the
AC output. The AC indicator will be off, and the LCD will display "AC OFF".
LED (3): Press the on/off button of the LED in the device is switched on.
Short press the button: Half brightness - full brightness - off
Long press the button: LED flashes (SOS signal)
Connectable devices
USB output port (8): smartphone, MP3 player, digital camera, electronic reader, tablet,
computer, etc.
Type-C USB output port (7): smart phones, tablets, etc.
DC 12V output port (9): mainly used for LED light bulb lighting.
AC output port (10): notebook computer, camera, display devices and other AC power
supply working equipment.
m Note: DC output is suitable for most products in the market. Some products with instan-
taneous high current may trigger over-current protection.
m Note: Please make sure that the connected electrical products can work properly be-
fore using this product.
m Note: Products such as saws, drills and air conditioning systems with a nominal power
of 500W must not be operated with this device, as they have a starting current that is three
times as high as the maximum discharge current of the portable power station.

9. Start up

1. Press and hold the on/off button (5) for 2 seconds, to switch on the power supply. Then
the LCD display lights up.
2. DC: Press the DC button (4) for 2 seconds to supply devices with direct current.
AC: Press the AC button (6) for 2 seconds to supply devices with alternating current.
30 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

5912802901

Inhaltsverzeichnis