Working With The Unit - Steinberg Systems SBS-LBM-150 Bedienungsanleitung

3.3. Working with the unit

CAUTION!
complete and as expected! In case of discrepancies, contact the supplier
immediately!
OPERATING THE UNIT:
a)
Connect the power cord (6) to the unit's power output (7).
b) Plug the power supply plug (9) into an electrical outlet.
c) Start the unit by setting the power switch (8) to the "I" position. The power
indicator will turn on. Setting the switch to the "0" position will turn off the
unit.
The power switch is located on the rear panel of the unit.
d) Set the desired speed of the unit with the knob.
Turn the knob clockwise to increase the rpm,
Turn the knob to the left to decrease rpm.
e) Once the speed is set, the unit will automatically start the mixing process.
f) If the process time is over, turn the unit off by reducing the speed and setting
the power switch to the "0" position.
Before working on the unit, make sure that all components are