Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CaratecELECTRONICS
Installation
Verify scope of delivery
Before starting the installation, make sure that all the individual parts listed in the scope of delivery
are present�
Product installation
The device should be installed at a height of about 30 cm above the floor� Since
different gases can distribute themselves differently in the room due to their
density, up to two additional sensors should be installed at different heights or
WARNING
positions for better detection�
•
The mounting location should be as level as possible�
•
Check beforehand that there is sufficient space available at the desired
installation location to attach the screws and that no wires in the vehicle
are damaged during installation�
•
Make sure that the connection cable can be routed to the device�
Remove the mounting plate of the device�
1
32|33
Werbung
Inhaltsverzeichnis
