i-tec TB4DUALDOCKPD Gebrauchsanweisung Seite 8

Thunderbolt
TM
In Windows, the LAN port appears in Start → Control Panel (View Small Icons) → Device
Manager → Network Adapters as "Realtek RTL8153". Audio ports can be found in Start →
Control Panel (View Small Icons) → Device Manager → Audio, Video and Game Controllers
as "USB Advanced Audio Device" and/or according to the connected monitor (e.g. in Fig.
"LG Ultra HD (Intel
The installed ports are shown in macOS X as "TB4DUALDOCKPD" in "About This Mac" →
"System Profiler" → "Hardware" → "Thunderbolt".
CONNECTING THE DISPLAYPORT MONITOR
Use an HDMI cable or Thunderbolt™ cable to connect the monitor to the docking station.
The monitor may flicker on the laptop/tablet during installation of the additional monitor,
which is a standard condition. The dock supports a maximum of two monitors. Graphics
interface: 1x HDMI and 2x Thunderbolt™ 4
1 monitor connected via 1 DisplayPort cable - resolution up to 8K 7680x4320/30Hz
8K resolution is only supported if your laptop's Thunderbolt™ 3 connector supports
If the Thunderbolt™ 3 only supports DisplayPort 1.2, the maximum resolution is 5K
If Thunderbolt™ 3 only supports DisplayPort 1.2, the maximum resolution is 5K
The resolution, the frame rate and the maximum number of connected external monitors
depends on the capabilities of the host PC/laptop.
8 |
ENGLISH
4 / USB-C Dual Display Docking Station + Power Delivery 96W
Display Audio)").
®
HDMI
2 monitors connected simultaneously 2x DisplayPort,
resolution up to 4K 4096x2160@60Hz
TB4 TB4
DisplayPort 1.4.
5120x2880/60Hz
5120x2880/60Hz
HDMI TB4 TB4
ENGLISH