Evaluating Measurement Results - Beurer PO 30 Anleitung

7.2 Attaching the lanyard
To transport the pulse oximeter more easily you can attach a lanyard to the device.
. Insert the narrow end of the lanyard
1
through the holder as shown.
8. Operation
. Insert one finger into the
1
finger opening of the pulse
oximeter as shown and
hold it steady.
Note
When you remove your finger from the pulse oximeter, the device will automatically switch off
after approx. five seconds.
Function button
The function button on the pulse oximeter has two functions in total:
Switch-on function: When the pulse oximeter is switched off you can hold down the func-
•
tion button briefly to switch it on.
Brightness function: To select your desired display brightness, hold down the function but-
•
ton for slightly longer during operation.
Note:
The display orients automatically (vertical format, horizontal format). This ensures that the valu-
es are easy to read on the display at all times, regardless of how you hold the pulse oximeter.

9. Evaluating measurement results

. Draw the other end of the lanyard through
2
the loop at the narrow end and tighten.
2. Press the function button.
The pulse oximeter begins
its measurement. Do not
move during the measure-
ment.
3. Your measurement values
will appear on the screen
after a few seconds.
%SpO PRbpm
2
98
65