Herunterladen Inhalt Inhalt Diese Seite drucken

Toshiba dynadock U3.0 Benutzerhandbuch Seite 26

Vorschau ausblenden Andere Handbücher für dynadock U3.0:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 56
dynadock™ U3.0
Adjusting the Video Settings for the monitor connected to the
dynadock:
Right-click the dynadock U3.0 icon in the system tray/notification area,
the following options will appear on the menu:
In Windows
Screen Resolution: Change the resolution setting of the external
monitor connected to the dynadock.
Screen Rotation: Rotate the image on the external monitor connected
to the dynadock.
Extend To: Specify the extension direction if you are using multiple
monitors and Extend mode. This setting should match the physical
orientation of the connected monitors relative to each other.
For example, if the external monitor is physically positioned to the right
of your computer's display, select "Extend to Right".
Extend: Extend your desktop space across multiple monitors, so that
you can display different information on each monitor connected to your
computer.
Set as Main Monitor: Sets screens in extend mode with external
monitor connected to the dynadock as the main monitor.
Notebook Monitor Off: Sets external monitor connected to the
dynadock as the main monitor and turns off the notebook screen.
(May not appear in the dynadock utility menu when two displays are
connected to the dynadock™.)
Mirror: Duplicate the image showing on your computer's screen on the
external monitor connected to the dynadock.
Off: Turn off the external display. Devices connected to the dynadock
will still function.
Fit to TV: Grow or shrink the size of your windows desktop to match
your TV screen (enabled when applicable).
You can configure the settings in a pop-up window in Windows 10.
Shortcut to Windows
Shortcut to Windows
To change the screen resolution, select those options on the screen.
Be sure to select one of the supported resolutions numbers in the table
above. For an external monitor, you can also select any resolution
supported by that monitor.
To change the refresh rate, you can follow the ways below:
1. Select Video Setup from the menu, this will open the Windows
EN-26
dynadock U3.0
®
7/Windows 8.1:
Audio Setup
®
Video Setup
®
Display Settings screen.
sound settings.
display settings.
®
User's Manual

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis