Software Installation; Installing The Drivers - Toshiba dynadock U3.0 Benutzerhandbuch

dynadock™ U3.0
Component
HDMI
DVI-I video
output port
USB Upstream
Connector
DC-IN jack
The LAN port does not support wake-up-on-LAN.
NOTE
The Local Area Connection icon in the System Tray/Notification Area will
not show a connection. Open "Network Connections" to view the Ethernet
Connection.

Software Installation

Installing the Drivers

1. The drivers are provided at www.toshiba.eu/download-drivers.
Please select OPTIONS -> CONNECTIVITY -> DOCKS & PORT
REPLICATORS -> DYNADOCK U3.0 from the drop-down menu, then
click SEARCH. You can save it to a storage device and then install to
your computer.
You might need to temporarily disable anti-spyware or anti-virus
■
NOTE
programs while installing the drivers. It is also recommended that all
other applications are closed, as you will need to restart your computer
after the drivers are installed.
You need administrator privilege to install/uninstall the drivers.
■
Installation files with the latest drivers are also available for download
■
at www.toshiba.eu/download-drivers. Check periodically for updates.
You must read and accept the TOSHIBA software license agreement
■
when prompted, to proceed with the installation.
EN-16
Description
®
® out port HDMI out port can connect with Type A connector
®
HDMI cable (supports video and up to 5.1 surround
sound). A HDMI
In addition to this, it can send and receive control
signals.
For connection to a DVI or VGA monitor (using the DVI-I
to VGA adaptor equipped with your dynadock).
Connects the dynadock to the computer.
For connection to the provided AC power adaptor.
The dynadock always needs an external power supply
for operation, as it does not take power from the USB
bus of the computer.
® cable sends video and audio signals.
User's Manual