Storage And Transport; Intended Use; Safety Instructions - ERBE 20132-052 Bedienungsanleitung

VH_Nummer.book Seite 14 Donnerstag, 21. November 2002 9:45 09

Storage and transport

For transport, pay attention to the corresponding national regula-
tions or international agreements. In general these are:
• Pressurized gas cylinders must only be transported with
valve protection (e.g. cylinder cap).
• Cylinder valves must be closed tightly.
• Pressurized gas cylinders must neither be thrown nor sub-
jected to blows.
• Cylinders lying on their sides must be wedged or tightly fas-
tened in such a way they do not roll. Pressurized gas cylin-
ders can also be transported in suitable devices (e.g. pallets)
while standing as well. Pressure gas cylinders must be
secured during transport in such a way that there is no
chance of damage by the other freight.

Intended use

The argon cylinders are intended exclusively for connecting to an
ERBE APC 300.
The pressure reducer with pressure line is intended exclusively for
connecting to an argon cylinder which supplies argon to the ERBE
APC 300.

Safety instructions

WARNING!
Protect the argon cylinders from being heated by radiators or open
flames.
Argon cylinders must only be connected to the APC 300 with the
pressure reducers and pressure lines provided by ERBE.
Use no force of any kind on cylinders, cylinder connections, pres-
sure reducers and pressure line. Check the seals from the pressure
14