Functions - auna Beachboy Bedienungsanleitung

EN
14

FUNCTIONS

General functions
First unpack the supplied battery and insert it into the battery compartment
at the rear. Be sure to observe the correct polarity.
• Set the on/off switch to ON.
• Insert a USB or SD memory into the corresponding slot. The music
stored is played automatically.
• During playback, briefly press "Forward" or "Back" to select the desired
track. Press and hold these buttons to fast-forward or rewind the
current track. Press
• "play/pause" to pause and restart playback.
• Rotate bass and volume knobs to adjust bass and volume.
• Press MODE to change the mode
BT playback
• Activate BT on the device you want to connect and search for the device
named "Beachboy" and connect to it. A triple beep signal sounds as
soon as the connection has been successfully established.
• Play the music on the connected device. Music playback is controlled
via your connected device. You can adjust the volume via the connected
device or via the volume control on the speaker.
Radio
• Switch the device on. Make sure that no USB or SD memory devices
are connected to the unit. Press the MODE button to select the radio
function.
• During reception, briefly press "Play/Pause" to start the automatic
station search and store all stations.
• Press "Forward" or "Back" to change the station.
AUX input
For other devices, you can use the AUX input. Use the audio cable for the
connection. Use the MODE button to select the AUX function. All playback
control is done via the external device.