Franke FVAS A80 BK Gebrauchsanleitung Seite 12

4. CONTROLS
A
Key Key press
A Short
B Short
Long press on
the leftmost lines
when all loads
are off (motor
and lights)
Long press on
the rightmost
lines when all
loads are
(motor and
lights)
C Short
Long press with
all loads off (mo-
tor and lights)
D Short
Long press with
all loads off (mo-
tor and lights)
12
B
Function
Hold the key pressed to turn the hood on/off at the first speed.
Press or move your finger from left to right to increase the speed from
1 to 2, 3, Intensive.
The intensive speed is timed for 6 minutes. At the end of this time the
system automatically returns to the previously set speed.
Repeat the operation in reverse to decrease the speed (from right to
left).
Keypad Lock function
Activates/deactivates the keypad lock for hood cleaning.
This function is automatically deactivated after 2 minutes.
Induction/Gas Cooktop Selection
Select the type of cooktop in use, either Induction or Gas.
off
The Induction Cooktop is set by default.
Switches the lights on/off at maximum intensity.
Connected Mode Coupling
Before starting the procedure follow the specific instructions of the
manuals of the devices to be coupled.
The procedure for pairing of the hood with devices compatible with
the Connected Mode (remote control) starts. Only one remote control
can be paired. See the manual of the devices for details of the opera-
tions that need to be performed on these.
The coupling procedure takes 2 minutes. If no devices are recognised
within this time check that you have previously activated the proced-
ure for the devices to be coupled. The maximum number of linkable
devices may have been reached.
Switches the lights on/off at medium intensity.
Performs a Filters saturation alarm reset.
Signals the Metal Grease Filters saturation alarm and the need to
wash them. The alarm is activated after 100 hours of effective hood
operation.
Signals the Activated Carbon Odour Filter saturation alarm. The
alarm is activated after 200 hours of effective hood operation.
C D E F
Display/Led
The display shows 1.
The display shows the
selected speed.
If the Intensive speed is
selected
shows an animation.
All LEDs flashing
1 flashing LED G: con-
firms Induction Hob se-
lection.
2 flashes LED G: con-
firms Gas Hob selec-
tion.
Fixed
The display shows an
animation:
coupling in progress.
Upon successful com-
pletion of the procedure
all the LEDs will light up
for 2 seconds.
Fixed
The display shows F 3
times, indicating that the
filter reset has been
completed.
With the motor off, the
display shows F + 1
multiple times altern-
ately.
With the motor off, the
display shows F + 2
multiple times altern-
ately.
G
the display