Turbo Function - INVENTOR LDVI-09WFI Benutzerhandbuch

Silence function
2s
FP function
Press this button 2 times during one second under HEAT Mode and setting temperature of
16 C/60 F or 20 C/68 F.
O
O
O
2
Pressing On/Off, Sleep, Mode, Fan or Temp. button while operating will cancel this function.
LOCK function
LOCK function
5s
+
5s
Turbo
+
Clean

Turbo Function

Press Turbo button
Turbo
Keep pressing Fan button for more than 2 seconds to activate/disable Silence
function(some units).
Due to low frequency operation of compressor, it may result in insufficient cooling
and heating capacity. Press ON/OFF, Mode, Sleep, Turbo or Clean button while
operating will cancel silence function.
O
The unit will operate at high fan speed (while
compressor on) with temperature automatically
set to 8 C/46 F.
5s
Press together Turbo button and Humidity button at the
5s
Humidity
same time more than 5 seconds to activate Lock function.
Press together Clean button and Boost button at the
All buttons will not response except pressing these two
Boost
same time more than 5 seconds to activate Lock function.
buttons for two seconds again to disable locking.
All buttons will not response except pressing these two
buttons for two seconds again to disable locking.
When you select Turbo feature in COOL mode,
the unit will blow cool air with strongest wind setting to
jump-start the cooling process.
When you select Turbo feature in HEAT mode,
for units with Electric heat elements, the Electric HEATER
will activate and jump-start the heating process.
12
12
10