Mounting The Front Wheel On The Front Wheel Support; Before You Start - Safety And Handling; Important Safety And Product Warnings; Familiarisation - Togu Flow Perfect Benutzerhandbuch

Mounting the front wheel on the front wheel support

Note: The front wheel must be adequately supported. To do this, ensure that the front wheel
support is secure.
Note: Please observe the 'IMPORTANT SAFETY AND PRODUCT INFORMATION'.
Place the front wheel of your bicycle on the front wheel support
Align the front wheel support with the front wheel.
Orientate yourself to the grooves in the front wheel support. The front wheel support
is centred between the grooves and centred in relation to the position of the front wheel
in the longitudinal direction.
Now mount the Velcro tape. To do this, insert the tip of the Velcro tape from above
through a groove, pull it under the front wheel support and guide it back up through
the immediately adjacent groove.
Now place the Velcro tape around the tire or rim of the front wheel.
Check that the Velcro strap wraps around both the front wheel support and the tyre or
rim of the front wheel.
Tighten the Velcro strap only moderately. The front wheel must not be firmly
connected to the front wheel support.
Now check the position of the front wheel support. You can do this by raising the front
wheel and lowering it again. This positions the front wheel support under the front
wheel.
Make sure that the front wheel can move in the loop of the Velcro.

7. Before you start - Safety and handling

Important safety and product warnings

Please read this user manual carefully and in particular the additional document on important
safety and product warnings. This document is entitled 'IMPORTANT SAFETY AND
PRODUCT INFORMATION'. Information on this can be found in this user manual in chapter
3.
familiarization
Familiarize yourself thoroughly with the Flow Perfect
the Important Safety and Product Warnings document before using the product for the first
time. Please observe the product warnings, safety instructions and other information provided
by the manufacturers of the Smart Trainers.

Self-assessment

Under no circumstances should the use of the Flow Perfect
endanger you. If you have any questions or doubts after reading the user manual, please
consult a doctor, physiotherapist or trainer.
8. Adaptation to your area of application
Note: Please observe the 'IMPORTANT SAFETY AND PRODUCT INFORMATION'.
Information on this can be found in chapter 3.
Air Buffer - To change the size of the Air Buffer
By changing the size of the Air Buffer, the character of the movement of the Flow Perfect
be adapted to your wishes. To simplify, this can be compared to the tire pressure on a bicycle.
Page 10 From 14
® . Be sure to read this user manual and
V06-22
® unsettle, overtax or even
® can