Renkforce 1344640 Bedienungsanleitung Seite 3

Operating instructions
Radio wall clock with LC display
Item no. 1344640
Intended use
The product is used to display the time and calendar date.
The time is set automatically using an integrated DCF receiver.
Any use other than that described above could lead to this product being damaged and involves the risk of
short-circuiting, fire, electric shock, etc.
No part of the product may be modified or converted.
The safety instructions must be observed at all times.
This product complies with the applicable national and European requirements. All names of companies and
products are the trademarks of the respective owners. All rights reserved.
Package contents
• Radio wall clock
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR code.
Follow the instructions on the website.
Explanation of symbols
T his symbol indicates specific risks associated with handling, operation or use.
The arrow symbol indicates special tips and operating information.
Safety instructions
First, read the complete operating instructions carefully, as they contain important infor-
mation about the proper operation.
Damage due to not following these operating instructions will void the warranty! We do
not assume any liability for any resulting damage!
We do not assume any liability for personal injuries and material damages caused by the
improper use or non-compliance with the safety instructions! In such cases, the warranty
will be null and void!
• F or safety reasons, any unauthorised conversion and/or modification of the product is not
permitted.
• Do not expose the product to high temperatures, strong vibrations or heavy mechanical
loads.
• Please consult a specialist if you are uncertain about the correct operation, or regarding the
safety of the product.
• This product is not a toy and must be kept out of the reach of children. Only use the product
out of the reach of children; the product contains parts and batteries that can be swallowed.
• Do not leave packaging materials unattended. It may become a dangerous plaything for
children.
• Handle the product with care; it can be damaged by impact, blows, or accidental drops, even
from a low height.
• Also observe any further safety instructions in the individual chapters of these operating in-
structions.
Notes on primary and secondary batteries
• Batteries / rechargeable batteries must be kept out of the reach of children.
• Do not leave batteries/rechargeable batteries lying around; there is a risk that they could be
swallowed by children or pets. If swallowed, consult a doctor immediately.
• Leaking or damaged normal/rechargeable batteries in contact with the skin can cause acid
burns; therefore, use suitable safety gloves.
• B atteries/rechargeable batteries must not be short-circuited, opened or thrown into fire. There
is a danger of explosion!
• Do not recharge conventional non-rechargeable batteries; risk of explosion! Only recharge
rechargeable batteries that are intended for this purpose; use a suitable battery charger.
• Check that the polarity is correct when inserting the batteries/rechargeable batteries (pay
attention to plus and minus signs).
Individual parts and controls
REC
(1) TIME SET button
(2) REC button
(3) RESET button
(4) Battery compartment
(5) DCF symbol
(6) DST symbol
(7) Indicator of date
(8) Indicator of month
(9) Indicator of the day of the week
Assembly
The radio wall clock is hung on the wall.
• There is a suspension eye on the back of the device for wall mounting.
• Secure the clock in place with a screw or a nail that protrudes a few millimetres from the wall. Then hang
the clock on it with the suspension eye.
To ensure correct DCF reception, the radio-controlled wall clock should not be placed next to
electronic devices, cables, metal parts, etc.
Inserting/replacing batteries/rechargeable batteries
• Open the battery compartment (4) at the back of the housing and insert two new type AA/
Mignon batteries, observing the correct polarity.
• The correct polarity is indicated in the battery compartment.
• Next, the radio wall clock attempts to receive the DCF signal (see chapter "DCF Reception").
• Close the battery compartment (4) again.
• It is necessary to replace the batteries when the contrast in the LC display fades or the clock stops work-
ing.
Use of rechargeable batteries is possible. However, the lower operating voltage (rechargeable
battery = 1.2 V, battery 1.5 V) and lower capacity will reduce the operating time.
When no concrete indicator appears in the LC display or the clock can no longer be operated,
please press the RESET button (3) on the back of the case to activate the reset function. In
doing so, the internal processor is reset and returns to normal operation.
REC